Features & Specifications • 10 gauge steel (50 grade) on side construction. • 7 gauge floor. Standard on 14' and 16', optional on 12'. • 17” side height with brackets for side board extensions. • Fully boxed dirt-shedding top rail. • 45° sloped rub rail. • Four vertical braces per side. • Full-depth boxed rear corner posts with concealed hardware for a clean, streamlined look. • Front has triple bend top rail horizontal brace with seamless front panel. • 7” structural channel long sills and 3” structural channel cross sills on 12” centers. • Recessed shock resistant rubber mounted, FS 108 clearance lights. • All appearance corners have radius bends. • 2 part epoxy gray primer. • 1/2 cab shield.
Features & Specifications on Fold Down Side Body • Independently operated double door sides with removable center post. • Single pin release system to quickly remove center post. • Each side door features centrally located quick release lever. • 2 or 3 heavy duty double strap greaseable hinges per door. Tailgate Features & Specifications • Tailgate sloped 10° inward. • New oval shaped stop / turn / tail light in rear corner posts. • EZ-LATCHTM tailgate / Patented. • 23” end height, four-way tailgate with adjustable rod on trip lever. • Fully boxed brace frame with two vertical braces. • 10 gauge steel (50 grade) construction. • Angle iron reinforced decking at rear, ensures longer lasting gate seal. • 1-1/4” diameter top and 1" bottom hinge pins. • Optional coal chute door. • Optional spreader apron.

Features & Specifications • 10 gauge steel on side construction • 10 gauge steel floor with radius corners • Diamond Vogel 2 part epoxy gray primer • All appearance corners have radius bends • 45° sloped rub rail • 88” overall width on 8' and 10' 2-3 yard bodies; 96” overall width standard on all sizes • Sloped 1/4 cab shield with viewing window • Front panel of 10 gauge steel; seamless one piece design with a triple-bend top rail • Full height front tapered corner posts with clearance light cut-outs • One piece sides with two vertical side braces 6” wide • Fully boxed dirt-shedding top rail on sides • Sides include brackets for 6” side boards • Fold down sides feature centrally located quick release lever • Door handle positively extends and retracts 3/4” pins at each end, using a solid linkage member • Greaseable hinges on side, located so as not to interfere with underbody toolboxes • Recessed shock resistant rubber mounted, FS 108 clearance lights, also 3 cluster lights provided in lower apron • 5” structural channel long sills with 3” full width I-beam cross members on 16” centers
Tailgate Features & Specifications • Four-way tailgate with adjustable rod on trip lever • 10 gauge steel construction • Fully boxed brace frame with two vertical braces • Dirt-shedding top and bottom rails • Reinforced decking at rear ensures longer lasting gate seal • Heavy duty 1.25” diameter top and 1” bottom hinge pins • Includes patented EZ-LATCH™ tailgate mechanism • Optional: coal chute door(s), spreader apron • Optional: 8 gauge floor • Optional: 1/2 cab shield in lieu of 1/4